Rings-turned-out Support Hold

How to perform it

1. 1Preparation and positioning. Set both rings to equal height, verify the anchors and straps, and clear the space beneath and around you. Set the bars or rings so the feet can reach a platform for a controlled mount and dismount.
2. 2Entry. Use a step or low assistance to rise into support; avoid jumping into unstable shoulders. Establish straight elbows before the timed hold.
3. 3Hold position. Press tall through the supports with elbows extended, shoulders controlled, ribcage over pelvis, and legs quiet. Keep the rings close to the body. Turn the rings outward only as far as you can maintain without elbow or shoulder distortion.
4. 4Alignment standard. Keep the head neutral and avoid hanging passively between the shoulders, flexing the elbows, or using the straps/body for support.
5. 5Breathing and bracing. Breathe quietly while maintaining enough trunk and glute tension to prevent uncontrolled arching or swinging.
6. 6Exit. Turn the rings back to neutral if applicable, lower to the platform with control, and release only after the feet are stable.
7. 7Valid hold. Timing begins after stable straight-arm support is established and ends at elbow flexion, uncontrolled ring movement, loss of shoulder position, foot or strap assistance, or an unsafe dismount.

Common mistakes

• Hanging between the shoulders

  Fix: Press tall through straight arms without forcing the shoulders into an extreme depressed position.

• Rings drifting away

  Fix: Keep the rings close and reduce turnout or add foot assistance before they escape laterally.

• Elbows softening

  Fix: End the set at the first persistent elbow bend rather than extending the timer.

• Dismounting from collapse

  Fix: Return the rings toward neutral and lower to the platform while support is still controlled.

Safety

• Verify both anchors and straps, match ring height, and keep a clear fall zone; strap or anchor failure can cause a sudden fall.
• For adolescents, older beginners, or anyone new to this movement, progress by technical competence and use qualified supervision rather than age-based loading targets or forced maximal attempts.

Progressions & alternatives

• regressionRing Support Hold— Reduce strength, balance, or coordination demand while rehearsing the key pattern before returning to Rings-turned-out Support Hold.
• progressionStrict Ring Dip— Increase load, range, instability, or skill demand after Rings-turned-out Support Hold is repeatable through the planned volume with reserve and no technique drift.
• alternativeFeet-assisted Rings-turned-out Support Hold— Train a similar primary pattern with a different stability, equipment, or joint-loading profile when Rings-turned-out Support Hold is impractical or poorly tolerated.
• prerequisiteStrict Ring Muscle-up support phase— Use stable performance of Rings-turned-out Support Hold as one prerequisite before introducing the more demanding referenced skill; it is not the only readiness criterion.